Auger Backfillers for Pipeline & Tile Drainage Installation

Brown Bear Corporation manufactures auger backfillers for the utility industry used for backfilling in pipeline and tile drainage installation. The company manufactures several different machines for these processes based on its line of tool carrier tractors.

Find detailed information below for the Brown Bear Auger Backfiller that best suits your needs.

BROWN BEAR MODEL 300 AUGER BACKFILLER

The Brown Bear Model 300 is used by Jonah Gas Gathering, a pipeline contractor specializing in gas and oil gathering systems. After the trenching and pipe installation, the trench is backfilled with a Brown Bear Model 300 auger backfiller. The backfiller protects the pipe and coating and insures that the ditch is filled in a manner that prevents settling and washouts. When the model 300 is not being used as a backfiller, the forklift attachment is installed in place of the auger backfiller and the unit is utilized to handle pipe in the pipe yard.

PTOAB3610 AUGER BACKFILLER

• Front or Rear Farm Tractor Mount.
• Mounts to CAT II or CAT III three point hitches
• Maximum input 175 PTO HP. 1000 RPM PTO input, 1 3/8" X 21 spline shaft ISO (clockwise) rotation standard
• Optionally 1 3/4" X 20 spline and counter ISO rotation
• PTO input to slip clutch protected right angle reduction gearbox
• Enclosed 160 roller chain final drive with dip lubrication
• Drive and discharge bearings run in oil lubrication
• Right hand discharge
• Continuous auger with adjustable and replaceable wear plates
• Width : 10 foot
• Weight : 4250 pounds

---

NEW! R31 AUGER BACKFILLER FOR HIGH FLOW SKID &
COMPACT TRACK LOADERS

 

• Universal skid loader hitch and flat face hydraulic couplers.
• Remote hydraulic units require minimum 30 GPM flow at 3000PSI, maximum 50 GPM at 5500PSI
• Hydraulic 10 degree side to side tilt standard
• Continuous auger with adjustable and replaceable wear plates
• Piston drive motor with planetary gear reduction into 120 roller chain final drive
• Parallel filling results in less right-of-way disturbance
• Fill is pulverized as it is backfilled
• Return maintenance for washouts or sink holes is reduced
• Skid loader mounted backfiller is very maneuverable
• Compatible with water puddling or mechanical compaction
• Faster than blade filling
• Right hand discharge
• 8' or 10' width's available
• 3120 lbs

---

SERIES 24 AUGER BACKFILLER FOR SKID LOADERS

Brown Bear Corporation has introduced a scaled-down version of its self-propelled auger backfiller as an attachment for skid steer loaders. The R24C model is used with high-flow hydraulics. The backfiller is available in 7' or 8' widths. Tilt and angle options are available, as well as left-hand or right-hand discharge. The unit quickly and easily backfills trenches up to 12" wide and works parallel to the ditch line.

• Universal skid loader hitch and flat face hydraulic couplers.
• Remote hydraulic units require minimum 15 GPM flow at 2000 PSI, six (6) hydraulic motor sizes allows custom fitting to the skid loader hydraulics.
• Continuous auger with adjustable and replaceable wear plates.
• Hydraulic tilt and manual angle options.
• Parallel filling results in less right-of-way disturbance.
• Fill is pulverized as it is backfilled.
• Return maintenance for washouts or sink holes is reduced.
• Skid loader mounted auger backfiller is very maneuverable.
• Compatible with water puddling or mechanical compaction.
• Faster than blade filling.

Brush Cutting
Click Here
.................................................................................
All Terrain Carriers
Click Here
.................................................................................
Backfilling
Click Here